Questions about great Britain

[desfeeney]

Never mind Ireland.... WHAT ABOUT THE SCOTS, there still miffed you invaded them     

 

And if your really paranoid watch out for those welshmen in wellies 

 

Good Luck

<{POST_SNAPBACK}>

 

 

Excuse me, but if English is your first language, may I point out:

 

In line 1, "there" should read "they're", which is an abbreviation of "they are".

In line 3, "your" should read "you're", which is an abbreviation of "you are".

In line 3, "welshmen" should read "Welshmen", ie capitalised, as in British, Russian or French.

 

If English is not your first language, then you are forgiven.

If "American" is your first language, then I understand why you did what you did.

 

If it's any consolation, the only player with a worse record for mauling the English language is "Wolfman" from Game 73 who is not only a TA of mine, but who also is a fellow countryman, who lives in the same city and works 500 metres away from me.

 

Happy Gaming

[Galvorn]

If English is not your first language, then you are forgiven.

If "American" is your first language, then I understand why you did what you did.

 

.......

 

and works 500 metres away from me.

 

<{POST_SNAPBACK}>

 

Howdy Des,

 

And if "Texan" is your first language, I'm fixin' to have to correct all y'all....

 

the distance to your friend would be 500 yards or just about a quarter mile(good old English units, strangely enough)

 

Bill

 

Sorry, just couldn't resist as we've been fighting that particular "Frenchification" for a full generation.

[desfeeney]

 

 

If English is not your first language, then you are forgiven.

If "American" is your first language, then I understand why you did what you did.

 

.......

 

and works 500 metres away from me.

 

<{POST_SNAPBACK}>

 

Howdy Des,

 

And if "Texan" is your first language, I'm fixin' to have to correct all y'all....

 

the distance to your friend would be 500 yards or just about a quarter mile(good old English units, strangely enough)

 

 

 

 

 

Bill

 

Sorry, just couldn't resist as we've been fighting that particular "Frenchification" for a full generation.

<{POST_SNAPBACK}>

 

 

G'day Bill

 

I think the Romans, not the French, introduced metres, hence the Metric system.

Metres and kilometres are the actual distances.

Meters are the instruments which measure those distances (odometer measures distance and altimeter measures height).

I believe that the French introduced horse-eating and surrendering in battle at the earliest opportunity.

Australia switched from Pounds, Shillings and Pence to Dollars and Cents (Decimal Currency) in 1966 and to the Metric System in the early 1970s.

So we are accustomed to using metres and kilometres.

Incidentally, Australians race horses rather than eat them and we fight rather than surrender.

Okay, 20,000 Australians were captured at Singapore in WW2 but they were under the command of a spineless British paper-shuffler who issued the order to surrender to the Japanese.

 

Best wishes

 

Des Feeney

[Pandaemonium]

The French dictatorship of the proletariat, developed much if not all of the metric system after the French Revolution, as part of their effort to regularize all of the units of measure in the country.

 

In the U.S., the term for the unit of length is spelled meter, rather than metre as in Great Britain, Australia, ..., OK, the rest of the English-speaking world. (We have generally abandoned the 're' endings [more French-bashing?] in favor of 'er's.)

[desfeeney]

I defer to your superior knowledge.

[Fleur-de-Lis]

The French dictatorship of the proletariat, developed much if not all of the metric system after the French Revolution, ...

 

Uhmmm... Not quites. See more accurate description below.

 

 

THE METRIC SYSTEM

The need for a single worldwide coordinated measurement system was recognized over 300 years ago. Gabriel Mouton, Vicar of St. Paul in Lyons, proposed in 1670 a comprehensive decimal measurement system based on the length of one minute of arc of a great circle of the earth. In 1671, Jean Picard, a French astronomer, proposed the length of a pendulum beating seconds as the unit of length. (Such a pendulum would have been fairly easily reproducible, thus facilitating the widespread distribution of uniform standards.) Other proposals were made but over a century elapsed before any action was taken.

In 1790 in the midst of the French Revolution, the National Assembly of France requested the French Academy of Sciences to "deduce an invariable standard for all the measures and all the weights." The Commission appointed by the Academy created a system that was, at once, simple and scientific. The unit of length was to be a portion of the earth's circumference. Measures for capacity (volume) and mass were to be derived from the unit of length, thus relating the basic units of the system to each other and to nature. Furthermore, the larger and smaller version of each unit were to be created by multiplying or dividing the basic units by 10 and its powers. This feature provided a great convenience to users of the system, by eliminating the need for such calculations as dividing by 16 (to convert ounces to pounds) or by 12 (to convert inches to feet). Similar calculations in the metric system could be performed simply by shifting the decimal point. Thus the metric system is a “base-10” or “decimal” system.

The Commission assigned the name metre-meter-to the unit of length. This name was derived from the Greek word metron, meaning "a measure." The physical standard representing the meter was to be constructed so that it would equal one ten-millionth of the distance from the north pole to the equator along the meridian of the earth running near Dunkirk in France and Barcelona in Spain.

The metric unit of mass, called the "gram," was defined as the mass of one cubic centimeter (a cube that is 1/100 of a meter on each side) of water at its temperature of maximum density.  The cubic decimeter (a cube 1/10 of a meter on each side) was chosen as the unit of fluid capacity. This measure was given the name "liter."

Although the metric system was not accepted with enthusiasm at first, adoption by other nations occurred steadily after France made its use compulsory in 1840. The standardized character and decimal features of the metric system made it well suited to scientific and engineering work. Consequently, it is not surprising that the rapid spread of the system coincided with an age of rapid technological development. In the United States, by Act of Congress in 1866, it was made "lawful throughout the United States of America to employ the weights and measures of the metric system in all contracts, dealings or court proceedings."

By the late 1860's, even better metric standards were needed to keep pace with scientific advances. In 1875, an international treaty, the "Treaty of the Meter," set up well-defined metric standards for length and mass, and established permanent machinery to recommend and adopt further refinements in the metric system. This treaty, known as the Meter Convention, was signed by 17 countries, including the United States.

As a result of the Treaty, metric standards were constructed and distributed to each nation that ratified the Convention. Since 1893, the internationally agreed-to metric standards have served as the fundamental measurement standards of the United States.

By 1900 a total of 35 nations- including the major nations of continental Europe and most of South America-had officially accepted the metric system. In 1971 the Secretary of Commerce, in transmitting to Congress the results of a 3-year study authorized by the Metric Study Act of 1968, recommended that the U.S. change to predominant use of the metric system through a coordinated national program. The Congress responded by enacting the Metric Conversion Act of 1975. Section 5164 of Public Law 100-418 requires federal agencies to use the metric system by 1992.

The International Bureau of Weights and Measures located at Sevres, France, serves as a permanent secretariat for the Meter Convention, coordinating the exchange of information about the use and refinement of the metric system. As measurement science develops more precise and easily reproducible ways of defining the measurement units, the General Conference on Weights and Measures-the diplomatic organization made up of adherents to the Convention-meets periodically to ratify improvements in the system and the standards.

In 1960, the General Conference adopted an extensive revision and simplification of the system. The name Le Systeme International d’Unites (International System of Units), with the international abbreviation SI, was adopted for this modernized metric system. Further improvements in and additions to SI were made by the General Conference in 1964, 1967-1968, 1971,1975,1979,1983,and l991. 



Source Credit:
City of Brockton, Massachusetts
Weights and Measures Department

 

 

In the U.S., the term for the unit of length is spelled meter, rather than metre as in Great Britain, Australia, ..., OK, the rest of the English-speaking world.  (We have generally abandoned the 're' endings [more French-bashing?] in favor of 'er's.)

 

Actuallys... It is the Americain mentality (attitude) whiches prevents them from acknowleding that someone else can devise a superiore system.

 

Au Plaisir,

Fleur-de-Lis

[Fleur-de-Lis]

To get back on subjects...

 

rotor911:

 

If you need somes advice, please feels free to cantact me.

 

 

Au Plaisir,

Fleur-de-Lis

[LenLorek]

Actuallys... It is the Americain mentality (attitude) whiches prevents them from acknowleding that someone else can devise a superiore system.

 

I think its more of a Superpower menality: when Britain was the world's superpower it developed an arrogance to go with it, believing that it had nothing to learn from anyone else, so only home-grown new ideas were taken seriously -- and sometimes even home-grown ones were not adopted (as in "we built an Empire on this way of doing things, so it's obviously the best way", and "if it's good enough for my grandfather, it's good enough for me") , which is why

-- German warships of World War I had better targetting than British warships,

-- ideas for "mechanised warfare" by Captain Liddel of Britain's Royal Tank Regiment were adopted by Nazi Germany instead of Britain (= "blitzkrieg")

-- Britain's invention of the jet engine in the 1920s was first adopted by Nazi Germany, leaving Britain to catch up.

-- The world's first electronic computer, used to crack the German Enigma codes in World War II, was dismantled at the end of the war, leaving the US to re-invent computers in the late 1940s.

 

These days, the British Government is ready to adopt the best of anything, no matter where it comes from, but the British people in general still have the old conservative attitudes.

 

--Len Lorek

(former Victory player)

[ShadowKitsune]

Actuallys... It is the Americain mentality (attitude) whiches prevents them from acknowleding that someone else can devise a superiore system.

 

I think its more of a Superpower menality ...

--Len Lorek

(former Victory player)

<{POST_SNAPBACK}>

 

I have to agree with that statement.

 

-SK

[SmileyMCN]

Just a brief note from a Great Britain survivor:

 

KNOW YOUR ENEMY! Lay mines by air and sea! Mess up his navy.

 

Build Long Range Aircraft: NO SPITFIRES until version VC. Settle for the longer range Hurricanes.

 

BUILD COASTAL DEFENSES and keep troops in provinces susceptable to invasion.

 

If the Irish are not your TA, THEY ARE THE ENEMY!

 

I held Malta till game end by building 4 AIR 40's and converting them to Marines there. and TONS of anti aircraft battalions.

 

See my comments on naval open fire range in the survey there.

 

Lastly: Paratroopers are a deadly weapon. Build Transport aircraft.

 

Good hunting